You will need clippers, round nosed plyiers and flat nosed pliers could be useful too.

The Above NOT included

1 m x Trace Chain

6 x white discs

4 x black torpedos

16 x washers

These are guide lines only, you might want to make yours longer or shorter finished length of mine is 40"

Cut a piece of chain 12". Open an eyepin and pop through end link close carefuly. Place on white disc beads. Trim eyepin leaving 1/2" to loop over, thread on next piece of chain and close loop. I have cut the chain to 5 links inbetween each bead (20 at bottom)

Open next eye pin and attach to chain, place on wheel washer then clear faceted bead another washer, trim eyepin add chain and close.

Black

Same to add the black torpedo beads with the frill bead caps. repeat pattern down both sides. Attach bottom chain to one side and hold up necklace and allow it to fall straight so you don't get twists in the chain. Attach to final piece and hey presto.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Red

All materials supplied

This one is similar measures 42" but I've split the sections a bit more with a slightly longer length of chain in between the middle section.

So it is from the top, washer bicone bead washer 5 links, star washer diamond bead star washer 5 links, washer bicone bead washer ~ then 15 links flat disc, 5 links bead cap torpedo bead cap, 5 links flat disc bead. 15 links ~ repeat first section

As above Instructions start at the top and work down both sides then attach a length of 20 links across the bottom.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

One in mint lovely fresh colour for the spring looks gorgouse on white

Mint

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

And finally ....... well for the moment, one in my Favorite plums

Plum