|
|
||||||||||||
If flower spacers are included, attach to chain then bend the wire so they are facing upwards |
 |
If leaves are included you wrap plain wire through leaf hole first, then attach to chain.
|
||||||||||
Kit Contains |
||||||||||||
20" Sp Chain |
The beads in the kits will vary slightly so every necklace will be unique |
|||||||||||
50 Sp Heads ( Plenty of Spares)
|
||||||||||||
Short piece wire (to wrap leaves if included) |
||||||||||||
5 sp Oval Jump rings ( 2 spares) |
||||||||||||
1 Trigger Clasp |
||||||||||||
20 Glass Beads |
||||||||||||
 |
||||||||||||
Instructions |
Tips |
|||||||||||
Cut Chain to required length ~ attach jump ring to one end of small piece of chain then to the center of long length. |
Twist jump ring open ( to the sides) do not pull open |
|||||||||||
Thread bead onto headpin ~ slip headpin through loop, make a loop over chain, then twist the headpin around it's shelf. Clip off surplus wire, and flatten sharp edges with pliers. When all charms are in place as required |
Wrap Headpin over round nose pliers to make a small loop over chain, about 1/4" away from bead. Then holding loop with pliers pull end of headpin all around itself with second pair of pliers |
|||||||||||
Attach clasp with jump ring on one end of chain, and jump ring on other to make the clasp. |
Squeeze Jump rings together with flat nosed pliers, from the sides. |
|||||||||||
Hey presto a pretty charm necklace |
||||||||||||
Available in 9 colours |
||||||||||||
Wire wrapping can be a bit tricky to start with, so have put in some spare headpins so don't be frighten to have a play. Only word of caution don't wrap too close to bead or it may crack when flattening cut end down with pliers. |
||||||||||||
